Popup

<wa-popup> Since 2.0 stable

Popup is a utility that lets you declaratively anchor "popup" containers to another element.

This component's name is inspired by <popup>. It uses Floating UI under the hood to provide a well-tested, lightweight, and fully declarative positioning utility for tooltips, dropdowns, and more.

Popup doesn't provide any styles — just positioning! The popup's preferred placement, distance, and skidding (offset) can be configured using attributes. An arrow that points to the anchor can be shown and customized to your liking. Additional positioning options are available and described in more detail below.

Popup is a low-level utility built specifically for positioning elements. Do not mistake it for a tooltip or similar because it does not facilitate an accessible experience! Almost every correct usage of <wa-popup> will involve building other components. It should rarely, if ever, occur directly in your HTML.
top top-start top-end bottom bottom-start bottom-end right right-start right-end left left-start left-end
Active Arrow 
<div class="popup-overview">
  <wa-popup placement="top" active>
    <span slot="anchor"></span>
    <div class="box"></div>
  </wa-popup>

  <div class="popup-overview-options">
    <wa-select label="Placement" name="placement" value="top" class="popup-overview-select">
      <wa-option value="top">top</wa-option>
      <wa-option value="top-start">top-start</wa-option>
      <wa-option value="top-end">top-end</wa-option>
      <wa-option value="bottom">bottom</wa-option>
      <wa-option value="bottom-start">bottom-start</wa-option>
      <wa-option value="bottom-end">bottom-end</wa-option>
      <wa-option value="right">right</wa-option>
      <wa-option value="right-start">right-start</wa-option>
      <wa-option value="right-end">right-end</wa-option>
      <wa-option value="left">left</wa-option>
      <wa-option value="left-start">left-start</wa-option>
      <wa-option value="left-end">left-end</wa-option>
    </wa-select>
    <wa-input type="number" name="distance" label="distance" value="0"></wa-input>
    <wa-input type="number" name="skidding" label="Skidding" value="0"></wa-input>
  </div>

  <div class="popup-overview-options">
    <wa-switch name="active" checked>Active</wa-switch>
    <wa-switch name="arrow">Arrow</wa-switch>
  </div>
</div>

<script>
  const container = document.querySelector('.popup-overview');
  const popup = container.querySelector('wa-popup');
  const select = container.querySelector('wa-select[name="placement"]');
  const distance = container.querySelector('wa-input[name="distance"]');
  const skidding = container.querySelector('wa-input[name="skidding"]');
  const active = container.querySelector('wa-switch[name="active"]');
  const arrow = container.querySelector('wa-switch[name="arrow"]');

  select.addEventListener('change', () => (popup.placement = select.value));
  distance.addEventListener('input', () => (popup.distance = distance.value));
  skidding.addEventListener('input', () => (popup.skidding = skidding.value));
  active.addEventListener('change', () => (popup.active = active.checked));
  arrow.addEventListener('change', () => (popup.arrow = arrow.checked));
</script>

<style>
  .popup-overview wa-popup {
    --arrow-color: var(--wa-color-brand-fill-loud);
  }

  .popup-overview span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 50px;
  }

  .popup-overview .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }

  .popup-overview-options {
    display: flex;
    flex-wrap: wrap;
    align-items: end;
    gap: 1rem;
  }

  .popup-overview-options wa-select {
    width: 160px;
  }

  .popup-overview-options wa-input {
    width: 100px;
  }

  .popup-overview-options + .popup-overview-options {
    margin-top: 1rem;
  }
</style>

A popup's anchor should not be styled with display: contents since the coordinates will not be eligible for calculation. However, if the anchor is a <slot> element, popup will use the first assigned element as the anchor. This behavior allows other components to pass anchors through more easily via composition.

Examples

Activating

Popups are inactive and hidden until the active attribute is applied. Removing the attribute will tear down all positioning logic and listeners, meaning you can have many idle popups on the page without affecting performance.
Active 
<div class="popup-active">
  <wa-popup placement="top" active>
    <span slot="anchor"></span>
    <div class="box"></div>
  </wa-popup>

  <br />
  <wa-switch checked>Active</wa-switch>
</div>

<style>
  .popup-active span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 50px;
  }

  .popup-active .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }
</style>

<script>
  const container = document.querySelector('.popup-active');
  const popup = container.querySelector('wa-popup');
  const active = container.querySelector('wa-switch');

  active.addEventListener('change', () => (popup.active = active.checked));
</script>

External Anchors

By default, anchors are slotted into the popup using the anchor slot. If your anchor needs to live outside of the popup, you can pass the anchor's id to the anchor attribute. Alternatively, you can pass an element reference to the anchor property to achieve the same effect without using an id.

 
<span id="external-anchor"></span>

<wa-popup anchor="external-anchor" placement="top" active>
  <div class="box"></div>
</wa-popup>

<style>
  #external-anchor {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 50px 0 0 50px;
  }

  #external-anchor ~ wa-popup .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }
</style>

Placement

Use the placement attribute to tell the popup the preferred placement of the popup. Note that the actual position will vary to ensure the panel remains in the viewport if you're using positioning features such as flip and shift.

Since placement is preferred when using flip, you can observe the popup's current placement when it's active by looking at the data-current-placement attribute. This attribute will update as the popup flips to find available space and it will be removed when the popup is deactivated.

 top top-start top-end bottom bottom-start bottom-end right right-start right-end left left-start left-end 
<div class="popup-placement">
  <wa-popup placement="top" active>
    <span slot="anchor"></span>
    <div class="box"></div>
  </wa-popup>

  <wa-select label="Placement" value="top">
    <wa-option value="top">top</wa-option>
    <wa-option value="top-start">top-start</wa-option>
    <wa-option value="top-end">top-end</wa-option>
    <wa-option value="bottom">bottom</wa-option>
    <wa-option value="bottom-start">bottom-start</wa-option>
    <wa-option value="bottom-end">bottom-end</wa-option>
    <wa-option value="right">right</wa-option>
    <wa-option value="right-start">right-start</wa-option>
    <wa-option value="right-end">right-end</wa-option>
    <wa-option value="left">left</wa-option>
    <wa-option value="left-start">left-start</wa-option>
    <wa-option value="left-end">left-end</wa-option>
  </wa-select>
</div>

<style>
  .popup-placement span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 50px;
  }

  .popup-placement .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }

  .popup-placement wa-select {
    max-width: 280px;
  }
</style>

<script>
  const container = document.querySelector('.popup-placement');
  const popup = container.querySelector('wa-popup');
  const select = container.querySelector('wa-select');

  select.addEventListener('change', () => (popup.placement = select.value));
</script>

Distance

Use the distance attribute to change the distance between the popup and its anchor. A positive value will move the popup further away and a negative value will move it closer.

 
<div class="popup-distance">
  <wa-popup placement="top" distance="0" active>
    <span slot="anchor"></span>
    <div class="box"></div>
  </wa-popup>

  <wa-slider min="-50" max="50" step="1" value="0" label="Distance"></wa-slider>
</div>

<style>
  .popup-distance span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 50px;
  }

  .popup-distance .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }

  .popup-distance wa-slider {
    max-width: 260px;
  }
</style>

<script>
  const container = document.querySelector('.popup-distance');
  const popup = container.querySelector('wa-popup');
  const distance = container.querySelector('wa-slider');

  distance.addEventListener('input', () => (popup.distance = distance.value));
</script>

Skidding

The skidding attribute is similar to distance, but instead allows you to offset the popup along the anchor's axis. Both positive and negative values are allowed.

 
<div class="popup-skidding">
  <wa-popup placement="top" skidding="0" active>
    <span slot="anchor"></span>
    <div class="box"></div>
  </wa-popup>

  <wa-slider min="-50" max="50" step="1" value="0" label="Skidding"></wa-slider>
</div>

<style>
  .popup-skidding span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 50px;
  }

  .popup-skidding .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }

  .popup-skidding wa-slider {
    max-width: 260px;
  }
</style>

<script>
  const container = document.querySelector('.popup-skidding');
  const popup = container.querySelector('wa-popup');
  const skidding = container.querySelector('wa-slider');

  skidding.addEventListener('input', () => (popup.skidding = skidding.value));
</script>

Arrows

Add an arrow to your popup with the arrow attribute. It's usually a good idea to set a distance to make room for the arrow. To adjust the arrow's color and size, use the --arrow-color and --arrow-size custom properties, respectively. You can also target the arrow part to add additional styles such as shadows and borders.

By default, the arrow will be aligned as close to the center of the anchor as possible, considering available space and arrow-padding. You can use the arrow-placement attribute to force the arrow to align to the start, end, or center of the popup instead.
top top-start top-end bottom bottom-start bottom-end right right-start right-end left left-start left-end anchor start end center
Arrow 
<div class="popup-arrow">
  <wa-popup placement="top" arrow arrow-placement="anchor" distance="8" active>
    <span slot="anchor"></span>
    <div class="box"></div>
  </wa-popup>

  <div class="popup-arrow-options">
    <wa-select label="Placement" name="placement" value="top" class="popup-overview-select">
      <wa-option value="top">top</wa-option>
      <wa-option value="top-start">top-start</wa-option>
      <wa-option value="top-end">top-end</wa-option>
      <wa-option value="bottom">bottom</wa-option>
      <wa-option value="bottom-start">bottom-start</wa-option>
      <wa-option value="bottom-end">bottom-end</wa-option>
      <wa-option value="right">right</wa-option>
      <wa-option value="right-start">right-start</wa-option>
      <wa-option value="right-end">right-end</wa-option>
      <wa-option value="left">left</wa-option>
      <wa-option value="left-start">left-start</wa-option>
      <wa-option value="left-end">left-end</wa-option>
    </wa-select>

    <wa-select label="Arrow Placement" name="arrow-placement" value="anchor">
      <wa-option value="anchor">anchor</wa-option>
      <wa-option value="start">start</wa-option>
      <wa-option value="end">end</wa-option>
      <wa-option value="center">center</wa-option>
    </wa-select>
  </div>

  <div class="popup-arrow-options">
    <wa-switch name="arrow" checked>Arrow</wa-switch>
  </div>

  <style>
    .popup-arrow wa-popup {
      --arrow-color: var(--wa-color-brand-fill-loud);
    }

    .popup-arrow span[slot='anchor'] {
      display: inline-block;
      width: 150px;
      height: 150px;
      border: dashed 2px var(--wa-color-neutral-fill-loud);
      margin: 50px;
    }

    .popup-arrow .box {
      width: 100px;
      height: 50px;
      background: var(--wa-color-brand-fill-loud);
      border-radius: var(--wa-border-radius-m);
    }

    .popup-arrow-options {
      display: flex;
      flex-wrap: wrap;
      align-items: end;
      gap: 1rem;
    }

    .popup-arrow-options wa-select {
      width: 160px;
    }

    .popup-arrow-options + .popup-arrow-options {
      margin-top: 1rem;
    }
  </style>

  <script>
    const container = document.querySelector('.popup-arrow');
    const popup = container.querySelector('wa-popup');
    const placement = container.querySelector('[name="placement"]');
    const arrowPlacement = container.querySelector('[name="arrow-placement"]');
    const arrow = container.querySelector('[name="arrow"]');

    placement.addEventListener('change', () => (popup.placement = placement.value));
    arrowPlacement.addEventListener('change', () => (popup.arrowPlacement = arrowPlacement.value));
    arrow.addEventListener('change', () => (popup.arrow = arrow.checked));
  </script>
</div>

Flip

When the popup doesn't have enough room in its preferred placement, it can automatically flip to keep it in view and visually connected to its anchor. To enable this, use the flip attribute. By default, the popup will flip to the opposite placement, but you can configure preferred fallback placements using flip-fallback-placement and flip-fallback-strategy. Additional options are available to control the flip behavior's boundary and padding.

By default, flip takes effect when the popup would overflow the viewport. You can use boundary="scroll" to make the popup resize when it overflows its nearest scrollable container instead.

Scroll the container to see how the popup flips to prevent clipping.

Flip 
<div class="popup-flip">
  <div class="overflow">
    <wa-popup placement="top" flip active boundary="scroll">
      <span slot="anchor"></span>
      <div class="box"></div>
    </wa-popup>
  </div>

  <br />
  <wa-switch checked>Flip</wa-switch>
</div>

<style>
  .popup-flip .overflow {
    position: relative;
    height: 300px;
    border: solid 2px var(--wa-color-surface-border);
    overflow: auto;
  }

  .popup-flip span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 150px 50px;
  }

  .popup-flip .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }
</style>

<script>
  const container = document.querySelector('.popup-flip');
  const popup = container.querySelector('wa-popup');
  const flip = container.querySelector('wa-switch');

  flip.addEventListener('change', () => (popup.flip = flip.checked));
</script>

Flip Fallbacks

While using the flip attribute, you can customize the placement of the popup when the preferred placement doesn't have room. For this, use flip-fallback-placements and flip-fallback-strategy.

If the preferred placement doesn't have room, the first suitable placement found in flip-fallback-placement will be used. The value of this attribute must be a string including any number of placements separated by a space, e.g. "right bottom".

If no fallback placement works, the final placement will be determined by flip-fallback-strategy. This value can be either initial (default), where the placement reverts to the position in placement, or best-fit, where the placement is chosen based on available space.

Scroll the container to see how the popup changes it's fallback placement to prevent clipping.

 
<div class="popup-flip-fallbacks">
  <div class="overflow">
    <wa-popup
      placement="top"
      flip
      flip-fallback-placements="right bottom"
      flip-fallback-strategy="initial"
      active
      boundary="scroll"
    >
      <span slot="anchor"></span>
      <div class="box"></div>
    </wa-popup>
  </div>
</div>

<style>
  .popup-flip-fallbacks .overflow {
    position: relative;
    height: 300px;
    border: solid 2px var(--wa-color-surface-border);
    overflow: auto;
  }

  .popup-flip-fallbacks span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 250px 50px;
  }

  .popup-flip-fallbacks .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }
</style>

Shift

When a popup is longer than its anchor, it risks overflowing. In this case, use the shift attribute to shift the popup along its axis and back into view. You can customize the shift behavior using shiftBoundary and shift-padding.

By default, auto-size takes effect when the popup would overflow the viewport. You can use boundary="scroll" to make the popup resize when it overflows its nearest scrollable container instead.

Toggle the switch to see the difference.
Shift 
<div class="popup-shift">
  <div class="overflow">
    <wa-popup placement="top" shift shift-padding="10" active boundary="scroll">
      <span slot="anchor"></span>
      <div class="box"></div>
    </wa-popup>
  </div>

  <wa-switch checked>Shift</wa-switch>
</div>

<style>
  .popup-shift .overflow {
    position: relative;
    border: solid 2px var(--wa-color-surface-border);
    overflow: auto;
  }

  .popup-shift span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 60px 0 0 10px;
  }

  .popup-shift .box {
    width: 300px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }
</style>

<script>
  const container = document.querySelector('.popup-shift');
  const popup = container.querySelector('wa-popup');
  const shift = container.querySelector('wa-switch');

  shift.addEventListener('change', () => (popup.shift = shift.checked));
</script>

Auto-size

Use the auto-size attribute to tell the popup to resize when necessary to prevent it from overflowing. Possible values are horizontal, vertical, and both. You can use autoSizeBoundary and auto-size-padding to customize the behavior of this option. Auto-size works well with flip, but if you're using auto-size-padding make sure flip-padding is the same value.

By default, auto-size takes effect when the popup would overflow the viewport. You can use boundary="scroll" to make the popup resize when it overflows its nearest scrollable container instead.

When using auto-size, one or both of --auto-size-available-width and --auto-size-available-height will be applied to the host element. These values determine the available space the popover has before clipping will occur. Since they cascade, you can use them to set a max-width/height on your popup's content and easily control its overflow.

Scroll the container to see the popup resize as its available space changes.

Auto-size 
<div class="popup-auto-size">
  <div class="overflow">
    <wa-popup placement="top" auto-size="both" auto-size-padding="10" active boundary="scroll">
      <span slot="anchor"></span>
      <div class="box"></div>
    </wa-popup>
  </div>

  <br />
  <wa-switch checked>Auto-size</wa-switch>
</div>

<style>
  .popup-auto-size .overflow {
    position: relative;
    height: 300px;
    border: solid 2px var(--wa-color-surface-border);
    overflow: auto;
  }

  .popup-auto-size span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 250px 50px 100px 50px;
  }

  .popup-auto-size .box {
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);

    /* This sets the preferred size of the popup's content */
    width: 100px;
    height: 200px;

    /* This sets the maximum dimensions and allows scrolling when auto-size kicks in */
    max-width: var(--auto-size-available-width);
    max-height: var(--auto-size-available-height);
    overflow: auto;
  }
</style>

<script>
  const container = document.querySelector('.popup-auto-size');
  const popup = container.querySelector('wa-popup');
  const autoSize = container.querySelector('wa-switch');

  autoSize.addEventListener('change', () => (popup.autoSize = autoSize.checked ? 'both' : ''));
</script>

Hover Bridge

When a gap exists between the anchor and the popup element, this option will add a "hover bridge" that fills the gap using an invisible element. This makes listening for events such as mouseover and mouseout more sane because the pointer never technically leaves the element. The hover bridge will only be drawn when the popover is active. For demonstration purposes, the bridge in this example is shown in orange.
Hover Bridge
<div class="popup-hover-bridge">
  <wa-popup placement="top" hover-bridge distance="10" skidding="0" active>
    <span slot="anchor"></span>
    <div class="box"></div>
  </wa-popup>
  <br />
  <wa-switch checked>Hover Bridge</wa-switch><br />
  <wa-slider min="0" max="50" step="1" value="10" label="Distance"></wa-slider>
  <wa-slider min="-50" max="50" step="1" value="0" label="Skidding"></wa-slider>
</div>
<style>
  .popup-hover-bridge span[slot='anchor'] {
    display: inline-block;
    width: 150px;
    height: 150px;
    border: dashed 2px var(--wa-color-neutral-fill-loud);
    margin: 50px;
  }

  .popup-hover-bridge .box {
    width: 100px;
    height: 50px;
    background: var(--wa-color-brand-fill-loud);
    border-radius: var(--wa-border-radius-m);
  }

  .popup-hover-bridge wa-slider {
    max-width: 260px;
    margin-top: 0.5rem;
  }

  .popup-hover-bridge wa-popup::part(hover-bridge) {
    background: tomato;
    opacity: 0.5;
  }
</style>
<script>
  const container = document.querySelector('.popup-hover-bridge');
  const popup = container.querySelector('wa-popup');
  const hoverBridge = container.querySelector('wa-switch');
  const distance = container.querySelector('wa-slider[label="Distance"]');
  const skidding = container.querySelector('wa-slider[label="Skidding"]');
  distance.addEventListener('input', () => (popup.distance = distance.value));
  skidding.addEventListener('input', () => (popup.skidding = skidding.value));
  hoverBridge.addEventListener('change', () => (popup.hoverBridge = hoverBridge.checked));
</script>

Virtual Elements

In most cases, popups are anchored to an actual element. Sometimes, it can be useful to anchor them to a non-element. To do this, you can pass a VirtualElement to the anchor property. A virtual element must contain a function called getBoundingClientRect() that returns a DOMRect object as shown below.

const virtualElement = {
  getBoundingClientRect() {
    // ...
    return { width, height, x, y, top, left, right, bottom };
  },
};

This example anchors a popup to the mouse cursor using a virtual element. As such, a mouse is required to properly view it.

 Highlight mouse cursor 
<div class="popup-virtual-element">
  <wa-popup placement="right-start">
    <div class="circle"></div>
  </wa-popup>

  <wa-switch>Highlight mouse cursor</wa-switch>
</div>

<script>
  const container = document.querySelector('.popup-virtual-element');
  const popup = container.querySelector('wa-popup');
  const circle = container.querySelector('.circle');
  const enabled = container.querySelector('wa-switch');
  let clientX = 0;
  let clientY = 0;

  // Set the virtual element as a property
  popup.anchor = {
    getBoundingClientRect() {
      return {
        width: 0,
        height: 0,
        x: clientX,
        y: clientY,
        top: clientY,
        left: clientX,
        right: clientX,
        bottom: clientY,
      };
    },
  };

  // Only activate the popup when the switch is checked
  enabled.addEventListener('change', () => {
    popup.active = enabled.checked;
  });

  // Listen for the mouse to move
  document.addEventListener('mousemove', handleMouseMove);

  // Update the virtual element as the mouse moves
  function handleMouseMove(event) {
    clientX = event.clientX;
    clientY = event.clientY;

    // Reposition the popup when the virtual anchor moves
    if (popup.active) {
      popup.reposition();
    }
  }
</script>

<style>
  /* If you need to set a z-index, set it on the popup part like this */
  .popup-virtual-element wa-popup::part(popup) {
    z-index: 1000;
    pointer-events: none;
  }

  .popup-virtual-element .circle {
    width: 100px;
    height: 100px;
    border: solid 4px var(--wa-color-neutral-fill-loud);
    border-radius: 50%;
    translate: -50px -50px;
    animation: 1s virtual-cursor infinite;
  }

  @keyframes virtual-cursor {
    0% {
      scale: 1;
    }
    50% {
      scale: 1.1;
    }
  }
</style>

Built-in Animations

The following classes can be applied to the popup's popup part to animate it in or out programmatically. You can control the animation duration with the --show-duration and --hide-duration custom properties.

Slots

Learn more about using slots.

Attributes & Properties

Learn more about attributes and properties.

Methods

Learn more about methods.

Events

Learn more about events.

CSS custom properties

Learn more about CSS custom properties.

CSS parts

Learn more about CSS parts.

Importing

The autoloader is the recommended way to import components. If you prefer to do it manually, use one of the following code snippets.

CDN npm React

To manually import this component from the CDN, use the following code. 

import 'https://early.webawesome.com/webawesome@3.0.0-beta.2/dist/components/popup/popup.js';

To manually import this component from NPM, use the following code. 

import '@awesome.me/webawesome/dist/components/popup/popup.js';

To manually import this component from React, use the following code. 

import '@awesome.me/webawesome/dist/react/popup';
Need a hand? Report a bug Ask for help
    No results